 | | | | | | |
|
   | |
| | | |
| | | | | | |
| | | | | | |
| |
Beep circuit modifications.Longer or shorter beep. For a shorter beep, C1 could be reduced to 5 microFarad. For a longer beep, C1 could be increased to 22 microFarad. "oi" beep. 
First, increase C1 to 47 microFarad and move to new position. This will make the oscillator
voltage drop while it is running - making the beep shift tone.Next, to control the cut off point where the circuit switches off, place a 5v6 Zener in TR1 base circuit as shown. Different tone. Change component values as below (see diagram): 
R (three of) = 10K C (three of) = 6n8 R4 = 33K R5 = 4k7 This will increase the audio frequency to just below 1KHz. |
|
Site News
Magazine
New CB and communications related magazine planned for August. We are looking for people with an interest in the subject to contribute information, news and other articles. We are also keen to hear from communications related organisations wanting the opportunity of a well targeted advertising campaign. We are looking for people to Contact page. | | |
| | | | | | |
| | | | | | |
| | | | |||
| | | | | | |